Enamel 3 in 1 hammer green, 2.5 l Maxima

Applications
Enamel corrosion on metal intended for protection against corrosion and decoration of metal surfaces (clean, stained, rusted) steel, cast iron, stainless steel, nonferrous metals (enclosure minutes, gate, building's structure minutes, agricultural th techniques and metallically x cabinet s, machines s, metallically x c o n s and a door, an element s of decorative trim or the like), as well as wood surfaces indoors and outdoors.
UNIQUE FEATURES
- Represents the enamel on metal 3 in 1, which functionally combines the rust converter, anti-corrosive primer and decorative enamel.
- forms a solid coating on the surface of the anticorrosive film that protects the metal surface from exposure to moisture and air, rust formation.
- Does not require prior application of special materials for the removal of rust and priming.
- forms a high-strength coating, masking minor surface defects, resistant to water, weather influences, UV rays, industrial oils, household detergents.
- Dries quickly, thanks to several layers of enamel can be applied in one day.
- Enamel has high adhesion (adhesion) to the substrate.
CHARACTERISTICS
The film-forming:
Alkyd-styrene resin
Solvent:
solvent for anticorrosive enamels (not more than 10%)
Application method:
brush, roller or spray gun
Norm coating the surface of one layer::
8-12 m² / l depending on the type of substrate and the application method
Drying time one layer at a temperature (20 ± 2) ° C and relative humidity (65 ± 5)%:
Dust 15-30 minutes, "to touch" - 30-60 min, complete drying - 4 hours.
Guaranteed shelf life:
24 months from date of manufacture
TU U 24.3 - 32318370 - 006: 2007
RECOMMENDED USE
surface preparation
- The substrate must be thoroughly dry and free of dust, grease, salt precipitation and other contaminants.
- Net treat metal surfaces with sandpaper to increase the adhesion, remove sanding dust, degreased with solvent; previously painted metal surface is completely clean from previous painting material, a thick layer of loose rust, salt deposits and other contaminants with a wire brush or coarse sandpaper to remove grinding dust, degreased with solvent.
- Previously Painted wood surfaces clear from the previous painting material, process sandpaper, grinding dust removed
How to use
Enamel before use thoroughly.
The enamel is applied by brush, roller with short nap - 2-3 thin layer; spraying (distance from the surface of 15-20 cm, the pressure of 2 atm) - 3-4 layers with a difference of 15 minutes between layers. Vysokodekorativnye coating is obtained by applying the enamel and spray!
- If necessary, dilute the enamel diluent universal TM «Maxima», but not more than 10% by weight of the enamel with a brush or roller staining, and not more than 30-50% by weight of the enamel when applied by spraying. ATTENTION! You can not use white spirit, solvent and other oily solvents.
- Staining carried out at ambient temperature and a surface from + 10 ° to + 25 ° C, humidity of 85%. Do not carry out painting in windy or wet weather!
Drying time one layer of enamel at ambient temperature (20 ± 2)? C and relative humidity (65 ± 5)%: "dust" - minute 15-30, "tack-free" - 30-60 minutes total vysyhanie-.. 4 hours. Full hardening Coatings 24 hours. Low temperatures or high humidity may prolong drying time!
- Flow enamel on a single layer coating is from 8 m² / l to 12 m² / l depending on the type of substrate and the application method.
- After finishing work tool universal wash Thinner TM «Maxima».
Storage conditions
Store in a tightly closed container manufacturer at + 5 ° C to +35 ° C, protected from moisture and sunlight, far from the food products of the reach of children.
Precautions
Store in a tightly closed container manufacturer, protecting it from moisture and direct sunlight, away from food, out of the reach of children.
Painting carried out in well-ventilated areas.
To protect your hands to use rubber gloves.
Recycling
Do not empty into drains, water bodies, soil. Residues enamel and empties treated as debris.