Perforator SDS plus 1000 W, about 0-1300 / min, 0-5100 beats / min, max 28 mm DT-0185 Intertool

Puncher DT-0185 - a great helper at home at the time of repair, also carries out any installation, decoration and construction work in the domestic environment. This model of the gun with the mounting system drills SDS-Plus and horizontal arrangement of the engine has compact dimensions with a perfectly balanced in the hand. 1000W motor works fine with hard materials such as concrete, brick, stone. Strokes - 5100 beats / min, maximum energy - 3.5 J, easily copes with brickwork, plaster chips, Stroebe walls, ceiling, floor, etc. Three modes Drilling Hammer drilling Blow (with the possibility of positioning a chisel) In. hammer drill mode develops 1300 rev / min and the bore holes in steel - 13 mm in concrete - 28 mm, the tree - 40 mm. The operation speed is regulated via the trigger on the handle. Also for convenience in carrying out long-term work provided the power button lock. In addition to these modes, in the reverse punch is provided, which is required when jamming equipment for its release. Perforator fitted side handle, designed for easy interception tool operation. The handle can be mounted at the left or right hand for comfortable use. Rubberized reliable power cord wear, at the entrance of the tool is reinforced and protected from the excesses with the help of the rotation member. Cord length (290 mm) allows to work without additional extenders. Puncher and all supplied accessories are packed in a sturdy carrying case with extra reinforcing ribs for added strength. Metal locks on the case will save from accidental disclosure, and will last long, wide handle on the case allow convenient to carry all the punch and snap. Features: Productive and compact; Quick change of drills with SDS-plus system; High quality parts and assembly; Overload protection at jamming; Reverse; Set of accessories (borax peak chisel); Sturdy carrying case with metal locks for easy storage. Components perforator Side handle Depth Borax 6, 8, 10 mm Peak Chisel Guide Warranty