DIN rail 110mm. (6 units), the thickness of 0.9 mm. ElectroHouse

DIN EH-DIN-rack 110 is designed for rapid mounting the modular elketrooborudovaniya various types, such as an RCD, DIF machines, circuit breakers, etc. in electrical panels, installation boxes, cabinets. But this possibility of using the device are not limited to, as it can be fixed terminals, bus, electrical sockets, electric meters and more. This device is extremely simple and therefore reliable. Due to its shape, by type DIN rail profile reminiscent of the rail, she got another name - DIN-relsa.Blagodarya use this device modular electrical installation is extremely fast and requires no additional tools - it simply snaps on DIN-rail, which is much faster and more convenient than using a screw fastening. Just a couple of seconds required for the installation of the module. And the electrical service becomes much safer, more comfortable and faster - again, it is not necessary to unscrew the screws to detach the device. This requires the device to move the bottom clamp and remove the device from the DIN rail, which also takes no more than a couple of seconds. Moreover, the vast majority of modern electrical equipment unit is adapted for installation on the DIN rail and to search for something special not pridetsya.Konstruktivno DIN rack profile represents a metal complex shapes with perforations along the entire length, intended for mounting on a DIN rail surface by means of screws or self-tapping screws. It made of galvanized carbon steel. Can be operated at a temperature of from -60 to 60C at an average value of the relative humidity less than 90% .This model DIN rail has a length of 110 mm. and a thickness of 0.9 mm. Height - 7.5 mm. Width - 35 mm. It has four holes for mounting the size 20h6,5 mm. It refers to the type & Omega ;. This device is simple, reliable and comfortable to use and complies with international and European standards.