Compact Hammer Drill DT0107 - an indispensable tool for any handyman. Purpose of the hammer drill - drilling holes in materials such as wood, steel, brick with a maximum hole diameter of 13 mm. For fast drilling in masonry include stroke mode. The drill is equipped with a jaw chuck 1.513 mm below the key that comes with the drill. Drill DT0107 home network is powered by 230 V, while having, the motor 550 watts. The electric motor develops maximum number of idle speed to 2800 rev / min. The drill is equipped with additional side handle that can be rotated. power cord is a rubber tab, wherein the fixed key for clamping chuck. Those. if necessary, replace the drill bits, the key is always "at hand". Main handle drill has a rubber pad. Comfortable handle. Infinitely adjustable speed. Drilling depth. At the start button has a roller speed control. This function is convenient for drilling holes of different materials, different diameters and different depths. Moreover, the drill has a speed control and can be applied as a screwdriver. In addition, the drill is equipped with a locking start button for continuous long-term operation. For drilling holes of desired length is completed drill drill depth. A to select the drill mode, the side has a drilling mode switch button: with a bang and without impact.