Deep penetrating primer Super Base, 2 L Farbex

Applications
It is used to strengthen the absorbent, especially weak and brittle mineral surfaces for decorative, waterproofing, and other insulating coverings (brick, concrete, cinder block, cement, cement-lime plaster and other porous materials). Priming is performed before carrying out various finishing (plaster, bonding agents), coloring water-dispersion paints, applying wallpaper, tile, parquet flooring.
properties
environmentally friendly product
deeply penetrates and strengthens the coating base
It contains silver ions, which give the coating an antibacterial effect - disinfection and prevention of mold, fungi, algae and other biological diseases
aligns water absorption surface
increases adhesion of building materials with the basics
It reduces the consumption of paint extends the life of the complex refinishing
especially recommended for wet areas
Characteristics
The film-forming: acrylic dispersion
Solvent: Water
Application method: a brush, roller or spray gun
The rate of application for single-layer coating: 80-125 ml / m² primer or a solution thereof, depending on the type of surface
Drying time of one layer: not more than 1 hours (at a temperature (20 ± 2) ° C and relative humidity (65 ± 5)%
Guaranteed shelf life: 18 months from date of manufacture
Dilution
Dilution
application
Primer consumption - concentrate
without dilution
In cases excessively friable and crumbling surfaces
80-125 ml / m²
1: 1
Too loose, porous and highly absorptive surfaces: concrete, foam, etc.
40-60 ml / m²
1: 2
Srednevpityvayuschie surface: plaster, plasterboard, chipboard, fiberboard, etc.
25-40 ml / m²
1: 4
The surfaces with weak: stone, concrete, brick
15-25 ml / m²