24l Compressor, 2HP, 1.5kW, 220V, 8atm, 206l • min. PT-0009 Intertool

Reciprocating compressor PT0009 its technical characteristics very similar to PT0010 compressor. PT0009 model is very easy to use due to the modern compact design and location of the motor compressor unit on the same axis. The light weight makes mobile compressor. One person with the main handle for transport and handle exiting the rear of the receiver will be able to load it into the back of his car. Features Coaxial drive; Steel cylinder; 2 manometer; 2 outputs with quick couplings; Pressure regulator; Emergency relief valve; Overcurrent protection of the compressor housing with reset button. For transporting the job site compressor is equipped with two wheels. For stability during operation, the compressor has a support leg, which serves as a cushioning member. The compressor has a receiver volume of 24 l. It is used for painting, blowing, pumping, ie, where compressed air is used with pneumatic tools. The widespread use of this model has a compressor and at home. For example, for operation with an airbrush, wherein the substrate pattern, the receiver volume is sufficient. Especially that the compressor has a high level of security and a relatively low noise level. When choosing a compressor for use with pneumatic tools, pay attention to the technical characteristics of not only the compressor, but also on the characteristics of pneumatic tools, which you will apply. Otherwise, pneumatic tools will not work at full capacity. The compressor has a motor PT0009 1500 watts. The working pressure of 8 bar, and productivity 206 l / min. In order to be able to control the pressure, the compressor is equipped with two pressure gauges. One pressure gauge is used to control the pressure at the inlet, and the second to control the pressure at the outlet. Moreover, with the adjusting screw can be set within the correct pressure to 8 atmospheres. For periodic draining of the condensate in the bottom of the receiver has a bleed valve. Motor from external mechanical influences protected by an additional cover. Running the oil piston compressors in the cold season