Spray gun DT5060 used for dyeing various types of surfaces. In working with DT5060 spray gun may be used:. Alkyd paints, acrylic dispersion lacquers, impregnation fluid stripping wallpaper, pesticides, disinfectants, cold cleaners, primers for protection against rust stain modifiers, rust, etc. Due HVLP system implemented efficient transfer of paint material onto the painted surface while minimizing losses. A commutator motor with the turbine will create the necessary pressure for painting. Features of the nozzle parts completely metal; The large volume of the tank; The relatively low weight; Easy to operate; The use of different kinds of liquids and paints and varnishes; Brass nozzle and the needle; All-aluminum tank and a gun; Shoulder strap for carrying the spray gun during the operation; In order to control the viscosity of paint material in the kit is a special funnel for viscosity control; No vibration; Sufficiently long power cord with a flexible hose. Unlike the electric spray gun of the piston type, DT5060 model provides an easy and convenient operation because of the absence of vibration. DT5060 gun is equipped with an engine 600 watts. Airflow in this instrument is 1650 l / min and an operating pressure of 0.14 to 0.70 bar. In addition, there is realized easy cleaning system ClickClack. For a comfortable and convenient operation spray gun is equipped with a convenient strap to wear spray gun on his shoulder. The materials used and the liquid alkyd paints, primers, acrylic dispersion lacquers, blue; Wood protection, impregnation, water, liquid stripping wallpaper; Pesticides, disinfectants, cold cleaners, mineral spirits; Oil paints and varnishes, antifouling paints and primers for protection from corrosion; UV varnish removers, modifiers, rust stains, and other release agents. Important: Do not apply paints or other fluids that contain abrasive components.