Spray LVMP professional, 1.4mm nozzle, plastic upper tank 600 ml., 2bar PT-0115 Intertool

PT0115 professional paint sprayer is constructed with the use of an entirely new technology - LVMP (Low Volume Middle Pressure), which means that the issuance of low air volume at average pressure. This model is used for finishing the paint work. High quality inking is achieved due to structural changes in the air channel and the increased pressure in the air cap unlike HVLPII. "Thin" setting for a specific task can be carried out by allowing the separate adjustment of the air, supplying paint and the dispensing valve. This gun can not be used with coatings that contain abrasive components. Also, it is not recommended to use it with a hammer and paints. Especially for finishing paint work; Spray gun constructed according LVMP technology (Low Volume Middle Pressure Low volume of air at a pressure average); LVMP provides maximum economy of consumables; Better paint application due to structural changes in the air channel and the increased pressure in the air cap unlike HVLPII; Flat and oval torch; Triple adjustment; Included: Set for cleaning and maintenance, the pre-filter and an adapter with a spout 1/4 "; Lightweight construction, ergonomic housing and the handle; The main body of the gun, there are three adjustments to achieve the best possible result of applying coatings: air adjustment knob; adjustment knob liquid supply; adjustment knob of the control valve. Adjusting the flow and quality of the application of paint can be adjusted individually. Spray gun equipped with a nozzle diameter of 1.4 mm. Also in the package will be available and a set for cleaning and maintenance of the PT0115. Incidentally, this spray gun preset thread union 1/4 ", and included is an adapter with quick connection. It needs to tighten the threaded fitting in before using the spray gun. If the hose with threaded connection, the adapter does not necessarily cheat. As for ergonomics, there is no general problem. Thanks to the latest technology LVMP Model PT0115 became considerably lighter than their counterparts. His weight with a tank of only 760 grams. Work has become even easier, and the paint goes even better. Handle with trigger faithfully replicate the hands circuit and will not make the operator often intercept gun from hand to hand. For additional protection against premature clogging of nozzles, the bundle includes a pre-filter. It is set in the immediate release coatings of the tank in the gun. Specification spray gun PT0115 professional spray gun LVMP PT0115 Slide show Go to the presentation of a spray gun PT0115