Mastic asphalt aerosol 500ml FS-6850 Intertool

Means for protection of the body "Bituminous" with anti-corrosion properties INTERTOOL FS-6850 - black aerosol product based on modified bitumen. When spraying, on the surface layer forms an impact-resistant, resistant as to mechanical damage, and to the corrosive action of water, salts, weak acids, alkalis, various road reagents. Ensures long-term protection and noise insulation. Stops corrosion, preventing its further spread. Bituminous mastic with anticorrosive protection resistant to temperature and capable of protecting the coating at a temperature of from -40 ° C to + 90 ° C. It has excellent adhesion to most surfaces. Resistant to aging, drying up, exposed to sunlight. Use: • For anticorrosive protection of the bottom elements, sills, wheel arches, interior and exterior parts of automobiles, motorcycles, bicycles, ATVs, buses, agricultural machines. • To protect the metal parts of equipment. • To repair the roof, and repairing cracks in the walls and ceilings of buildings. • For sealing metal and wooden structures. One cylinder is designed for processing 2.5-3 m2. Method of application: The optimum temperature of the cylinder and the environment should be in the range from + 15 ° C to 25 ° C. To prepare the surface for the application of the mastic: free of dirt and rust, degrease. Painted and glossy surface must first be sanded with sandpaper. Mix the contents of the container, shaking it for at least 3-5 minutes - this will provide a uniform layer of coating, and prevent clogging of the atomizer. In operation must periodically shake the container. Spraying a thin layer of mastic at a distance of 25-30 cm. The best result is achieved when applied to a surface of thin layers of mastic 2-3 intervals for 20 minutes. Important: if the mastic in the container has not been fully used up, for its continued use is necessary to clean the valve. Turn the bottle sprayer down and make a spray jet before bleaching. Otherwise, the valve sealant dries, and use it in the future it will be impossible. Drying time 15-25 minutes at a temperature of + 25 ° C. Coating suitable for use 24 hours after treatment. In case of contact with mastic to unwanted sites recommended to rinse it, using cleaner Asphalt stain INTERTOOL FS-6940 Precautions: Avoid exposure to direct sunlight or temperatures above + 50 ° C. Do not spray on an open flame or heated surfaces. Do not smoke while using. Use in well ventilated areas. Do not allow to enter the respiratory system, eyes, mouth, and also on damaged skin. Do not open or burn bottle after use. Store at + 5 ° C to + 35 ° C in the reach of children. Pressurized container! Flammable!