Small filter for 1/4 of a spray gun in a metallic housing, a cartridge-foam metal PT-1403 Intertool

PT1403 minifilters used with a spray gun. PT1403 used to filter inlet air directly to a spray gun. It effectively cleans the air entering the paint gun, removes residues solids, water, oil and dirt. PT1403 consists of several components. The basis is minifilter cartridge from metal foam. Due cartridge made of foam metal maximum protection against ingress of fine particles into the nozzle of a spray gun. The cartridge has unique properties and is reusable. To maintain the original properties of the cartridge and to provide maximum protection against the ingress of fine particles, it is recommended to periodically clean the removable cartridge in solvents. To remove the cartridge, unscrew the lower part of the upper base minifilter. During cleaning cartridge careful not to lose the sealing ring on the lower base and plastic bushing. "Metal foam - a metal alloy honeycomb structure most cases, foam metal occurs based alloys of aluminum and magnesium.." PT1403 is a small device with screw connections 1/4 ". The lower part of the housing has a drain valve. This valve releases minifilter from excess moisture that accumulates during operation. In addition, a major advantage can be considered minifilter its installation directly to the paint gun without the use of additional devices. it provides the convenience for the user, allowing it to quickly and effortlessly connect minifilter to a spray gun. minifilters has the metal block sky housing that when falling or other mechanical damage retains its original appearance and integrity of the structure. The upper and lower base minifilter also made of metal. Maximum pressure (upper limit) minifilter is 150 PSI or 10 Atm. Pressure minifilter must correspond to the operating pressure spray gun and should not exceed the upper limit of presentation:. minifilters PT1403