Saw chain 2400Vt 800 m • min tire 400mm, 230V direct drive DT-2204 Intertool

Chain saw DT2204 powerful, reliable and secure tool. It is easy to cope with any kind of work on the country or the plot: pruning the branches of trees and bushes, firewood, etc. A feature of the chain saw is directly DT2204 location engine that provides the optimum balance in the hand tool during operation.. Features Security System, longitudinal engine. Those. Direct location engine that provides the optimum balance in the hand tool during operation, automatic lubrication circuit Rapid stop stroke Easy maintenance. The chain saw has DT2204 2400 W power and operates at a frequency of 50 Hz. Operating voltage in this case is 230 V. The length of the guide bar 405 mm. The length of the allowable cut of 330 mm. chain idling speed is 800 m / min. Supplied with a chain saw, a tire chain, the key for assembly and blade adjustment, manual and warranty card. Remove the blade assembly nut fastening of the tire and remove the cover tsepeulovitelya; Turn brake circuit; Slide rail onto the bolt and move it back up to the stop rail set so that chain tension pin is entered into the tire hole; Put the chain on the drive sprocket and tuck it into the guide bar groove; Replace the cover tsepeulovitelya; Screw nut by hand tire attachment pull chain to remove slack from the lower portion of the tire; Lift the end of the bus and pull the chain. The chain is tensioned correctly if the tire in the middle of the chain can be pulled to 34 mm and wherein the stretch her hand; Lift the tip of the bar and tighten the nut wrench tire mounting. To start the saw DT2204, press the lock accidental activation button and then pressing the switch. Disabling saws made by releasing the switch. Before you can use is required to fill the oil tank, in order to allow the chain lubrication. Operate saw without chain lubrication is prohibited!