Acrylic finish plaster white, 5 kg Farbex

Applications
Ready-to-use putty snowy surface, is intended for finishing the alignment of walls and ceilings before painting or gluing wallpaper, and is also used to connect the gypsum plasterboards. Applied on plaster, plaster, plasterboard, cement-lime and gypsum surfaces, chipboard, fibreboard, OSB-boards and others.
properties
It forms a perfectly white and smooth surface
thickness 2 mm
easily applied and sanded
perfect for applying manually and with the help of special equipment
vapor permeable
dries quickly
Characteristics
consumption rate in one layer: 1,8 kg / m at a layer thickness of 1 mm.
Drying time of the 1st layer 1 mm thick (20 ° C; 65% RH): 3 hr. The next layer is applied after drying of the previous.
Diluent: water (no more than 5% by weight of the filler).
Application method: metal spatula or a special atomizer with a layer thickness of 2 mm.
Composition: Fillers, pigments, water, acrylic latex, desired additives.
Guaranteed shelf life: 18 months from date of manufacture
surface preparation
The surface must be dry and thoroughly cleaned from fragile coating, dust, dirt, grease and other contaminants. For protection against mold and mildew, depending on the type of surface, it is necessary to apply an antiseptic for wooden or mineral surfaces TM «Farbex». Highly absorbing, brittle and porous surfaces should be primed TM «Farbex» deep penetration.
How to use
Before using putty mix thoroughly. Caulking is ready for use. Work carried out at ambient temperature and the working surface from + 10 ° to + 35 ° C. After drying, sanded surface with fine sandpaper and apply primer TM «Farbex» deep penetration.
Troweled filler in 1-2 layers. To align deep cracks and unevenness is recommended to apply the finish plaster in several layers.
The next layer is applied after drying of the previous (drying time 1 st layer thickness of 1 mm at 20 ° C. 65% RH was 3 hours).
Storage conditions
Store in a tightly closed container manufacturer, at a temperature from +5 ° C to +35 ° C, protected from moisture, direct sunlight and frost in the reach of children.
Precautions
Do not mix with organic solvents. It does not contain harmful and toxic substances. After contact with skin wash off with water.
Recycling
Do not empty into drains, waterways or soil! Residues dried putties and empty container disposed of as ordinary debris.