Compressor 100 l, 3000 W, 220 V, 8 atm, 500 L • min, 2 cylinder PT-0014 Intertool

Powerful performance PT0014 compressor with single-phase motor is used for supplying compressed air, pneumatic equipment used in various fields. In the compressor of sufficient capacity to simultaneously connect multiple pneumatic tools, and the total flow rate consumers must not exceed the compressor capacity. Normal operation of the compressor is provided at a ratio of operating time to rest 2 to 1. Properties asynchronous monophase; Vobrazny engine; 2 steel cylinder; Two outputs with quick couplings; Two pressure gauge and pressure regulator; Automation; Overcurrent protection of the compressor housing with reset button; Emergency relief valve; When the working pressure of 8 atm compressor capacity is 500 liter / min., Volume 100 L receiver. Compressor for its easy movement around the job site, has two wheels and a chrome elongated handle connected to the receiver. On the reverse side of the receiver installed additional handle for lifting the compressor. Two support legs smooth compressor vibrations during operation. compressor control unit consists of enable / disable unit, two exhaust valves, pressure gauges, pressure relief valve. In order to protect the user, pulleys with belts covered with a protective metal grid. Vobraznuyu compressor has a cylinder head, in which the upper base are arranged two suction filter. Compressor equipped with a one-phase motor 230 (3000 watts) which, via a belt transmission gives vozvratnopostupatelnoe piston movement. piston displacement blower is provided. Structure receiver (100 l), the control unit: on / off blocks, two outlet valves, pressure gauges, pressure relief valve. Alternating electric motor 230 (3000W), air filter and pipelines, automation unit, and measuring the pressure regulator, the outlet valve. A bypass valve which is disposed in the cylinder head, provides a flow of air through the air filter into the cylinder. The compressed air through a pipe line enters into the tank for compressed air (receiver). The receiver mounted automation unit, and measuring the pressure regulator, the outlet valve. Finally, through a flexible hose (not supplied) compressed air is supplied to the connected pneumatic tools and sets them in motion. To ensure the quality of compressed air is required to use the characteristics of the air preparation unit.