300l Compressor, 20HP, 15 kW, 380V, 8atm, 2000 l • min. 3 cylinder PT-0052 Intertool

PT0052 reciprocating air compressor is used to supply compressed air to the pneumatic equipment manufacture and in workshops. The compressor has a powerful engine consumes 15 kW electric voltage of 380 V. The compressor capacity is 2000 l / min at 8 atmospheres operating pressure. With a capacity of the compressor can be safely connect multiple air tools at the same time. The compressor has a modern Wobraznuyu head with three steel cylinders. Thanks to this arrangement of cylinders considerably spared area occupied by the compressor pump. On each cylinder are suction filters that must be cleaned periodically. Features Professional compressor; Asynchronous three-phase; Wobrazny engine; 3 steel cylinder; Direct access from the receiver with ball valve; Automation; Emergency relief valve; The compressor has a belt transmission that provides smooth operation and minimum noise in the work. Piston group vraschatelnopostupatelnye performs motion by the rotation of the crankshaft, which is connected with the pulley of the impeller. It is known that the frictional force causes the mechanisms to bask. Therefore, here the impeller acts as a cooling element, preventing overheating of the piston and rings. The impeller is driven by a rotary motion through a belt drive, which connects the motor pulley with the pulley of the impeller. Such motion transmission type smoothes vibration and prevents overheat friction mechanisms. The large volume of the receiver - is, above all, efficiency. The main task of the receiver is to provide a compressed air supply and smoothing the pulsation. Volume 300 L receiver PT0052 compressor provides high efficiency operation and accumulates a large amount of air consumption for large pneumatic cylinders. Compressor has a fully automatic start. Emergency relief valve does compressor safest operation. Compressor equipped with three outputs, two at the top of the receiver and the third line in the receiver with ball valve. On the job site compressor can be installed permanently and move thanks to the 4 wheels.