Compressor 24l, 1.5HP, 1.1kW, 220V, 8atm, 145l • min, low noise, oil-free, two cylinder PT-0022 Intertool

This compressor model is applicable to virtually any work that require compressed air. Widespread use of compressor PT0022 found in medicine, in dental offices for denture installations in industry, in the home (e.g. airbrush). The main features of the compressor is its ability to operate without oil, and a very low noise level. Properties Very low noise level (54 dB); Absolutely clean air outlet; oil-free; Coaxial drive; Filter with pressure regulator; Coaxial drive; Automation; Overcurrent protection of the compressor housing with reset button; Emergency relief valve; This is achieved in that the piston ring is made of self-lubricating material with very low friction. If its performance and the presence of two compressor cylinders has a very low power consumption. Motor power is only 1100Vt. Compressor capacity is 145 liters / min and operating pressure of 8 atm. The receiver mounted compressor automation unit: meter, pressure regulator, vent valve with filter and two pressure gauges. Appointment gauge shows inlet and outlet pressures. By means of the adjusting screw can set the desired pressure at the outlet. Filter retains all the fine particles at the outlet from the receiver to the pneumatic tool behaved as possible pure air without tangible particles. For movement in the platform has two compressor wheels and convenient handle coupled to the receiver. Maximum support leg dampens vibrations of the compressor, and plays the role of the damping element. The lower part of the receiver has a valve for draining condensate which may be formed periodically during operation. So do not forget to drain the condensate from the receiver. Otherwise, the compressed air is supplied to pneumatic tools may include fine particles of water, which for painting, for example, is not desirable. To eliminate the use of moisture particulate air preparation unit.