Compressor 50l, 2.5HP, 1.8kVt, 220, 8atm, 233l • min. PT-0011 Intertool

The compressor piston PT0011 - one representative compressors 50 L receiver, whose belt drive instead of coaxial. And a little bit different design from other pyatidesyatilitrovyh compressors from our range. In this model, for the on-site compressor convenient transportation handle is connected to the platform on which the motor is installed. Features belt drive; 2 steel cylinder; 2 outputs with quick couplings; 2 manometer and a pressure regulator; Automation; Overcurrent protection of the compressor housing with reset button; Automatic resetting safety valve; Two support legs with rubber pads act as cushioning elements. Compressor PT0011 has a receiver volume of 50l. 1800W electric motor connected to the shaft of the cylinder head belt transmission. With two steel cylinders, which saturate the compressed air receiver, the performance is 233l / min, pressure 8atm. Vozvratnopostupatelnoe movement on the cylinder head by means of a belt. Belt pulley mounted on the drive motor and the driven pulley with impeller. A driven pulley mounted on a drive shaft of the pump. To cool the cylinder driven pulley has blades that forced air is supplied to the cylinder edges and during operation does not let it cool. In order to be able to control the pressure, there are two pressure gauges on the compressor. A pressure gauge is used to control the pressure in the receiver, and the other to control the pressure of the receiver. Moreover, with the adjusting screw can be controlled and set pressure is supplied to pneumatic tools. Normal operation of the compressor is provided with the ratio of work to rest, as 2 to 1. PT0011 Compressor will help you cope with the work, which uses compressed air, save you money on electricity, a pleasure to work with the compressor due to clear design and high-quality assembly of all the parts. Running the oil piston compressors in the cold season